If you are a cat owner, you know how important water intake is for their health. A water fountain can encourage your cat to drink more water and make sure they stay hydrated. The Catit Water Fountain is a popular choice for cat owners, as it offers a fresh and constantly circulating water source. However, setting up the fountain can be overwhelming for some. In this article, we will provide step-by-step instructions on how to set up a Catit Water Fountain.
Table of Contents
- 1 Step 1: Gather Equipment
- 2 Step 2: Take Apart the Catit Water Fountain
- 3 Step 3: Rinse the Parts
- 4 Step 4: Set Up the Filter Housing
- 5 Step 5: Fill the Fountain with Water
- 6 Step 6: Plug In and Test the Fountain
- 7 Step 7: Check the Water Level
- 8 Step 8: Clean and Maintain the Fountain
- 9 Related Products
Step 1: Gather Equipment
Before starting, you will need to gather the following equipment:
- Catit Water Fountain
- Electricity source
Step 2: Take Apart the Catit Water Fountain
The Catit Water Fountain comes with a few different pieces, including the fountain base, the cover, the filter, the filter housing, and the water inlet. To begin setting up the fountain, you will need to take it apart.
Step 2.1: Remove the Cover and Filter Housing
Start by removing the cover and filter housing. These pieces simply lift off of the fountain base.
Step 2.2: Remove the Filter
Next, remove the filter from the filter housing. This can be done by turning the filter housing upside down and pressing on the center of the filter until it pops out.
Step 3: Rinse the Parts
Once you have taken apart the Catit Water Fountain, rinse all of the parts with water to remove any dust or debris.
Step 4: Set Up the Filter Housing
Step 4.1: Insert the Filter
Take the filter and insert it into the filter housing. Make sure the filter is centered in the housing.
Step 4.2: Snap the Filter Housing Back In Place
Once the filter is in place, snap the filter housing back onto the fountain base.
Step 5: Fill the Fountain with Water
Before plugging in the Catit Water Fountain, fill the reservoir with water. Make sure you fill the fountain to the waterline indicated on the fountain (usually near the top of the fountain).
Step 6: Plug In and Test the Fountain
Plug the Catit Water Fountain into an electrical outlet and switch it on. The water should begin to flow through the fountain and out of the spout.
Step 7: Check the Water Level
Check the water level in the fountain regularly and make sure it stays full. If the water level drops too low, the fountain can become damaged or stop working altogether.
Step 8: Clean and Maintain the Fountain
Cleaning and maintaining the Catit Water Fountain is important to keep it functioning properly. Check the filter regularly and replace it as needed. Clean the fountain every few weeks with a mixture of water and white vinegar.
Setting up a Catit Water Fountain is relatively straightforward, and with these step-by-step instructions, you can have your fountain up and running in no time. Remember to keep the fountain clean and maintained to ensure your cat has a healthy supply of fresh water at all times.
- How To Set Up Catit Water Fountain?
- How To Set Up Petlibro Water Fountain?
- How To Set Up Peace Water Fountain?
- Amzdeal Water Fountain How To Set Up?
- How To Set Up Pump In Water Fountain?
- How To Set Up A Tabletop Water Fountain Pump?
- How To Set Up Solar Powered Water Fountain?
- How To Set Up A Water Fountain?
- How To Set Up Cat Water Fountain?
- How To Set Up Water Fountain?
Last update 2023-11-28