How Do I Change A Sink In To A Water Fountain?

If you are looking to add a unique and calming touch to your home or garden, the sound of trickling water from a water fountain can be just what you need. However, purchasing a brand new fountain can be costly, especially if you want a larger or more intricate design. Fortunately, you can easily transform a sink into a water fountain with a few simple tools and materials. In this article, we will guide you through the steps on how to change a sink into a water fountain.

Step 1: Gather Your Materials and Tools

Before you begin, gather all the necessary materials and tools. Here’s what you will need:

– A sink with a basin large enough to accommodate a fountain pump

– A fountain pump (we recommend one with a flow rate of at least 100 gallons per hour)

– A fountain head attachment

– Clear vinyl tubing (1/2 inch diameter)

– A 5-gallon bucket or container

– Decorative stones or pebbles

– Waterproof silicone adhesive

– A handheld drill with a 1/2 inch drill bit

– A hole saw attachment (optional)

Step 2: Prepare the Sink

First off, clean the sink thoroughly and remove anything that may be stuck to the surface. Check the sink for any cracks or chips, and use silicone adhesive to fix them before proceeding further. If possible, choose a sink with a flat bottom and a depth of at least 4 inches to accommodate the fountain pump and tubing.

Step 3: Drill a Hole in the Sink

Next, drill a hole in the back of the sink, near the bottom, using a handheld drill with a 1/2 inch drill bit. You can also use a hole saw attachment for a more polished finish. Make sure to drill the hole close to the wall or close to the sink’s attachment point to hide the tubing.

Step 4: Install the Fountain Pump

Insert the fountain pump into the sink, making sure it is placed in the center of the basin. Attach the fountain head to the pump and run the vinyl tubing over the side of the sink through the hole you drilled.

Step 5: Set up the Fountain Base

Place a 5-gallon bucket or container under the sink where the tubing exits the hole. Stack up the decorative stones or pebbles at the bottom of the bucket to mimic the look of a pedestal. You can also use any other base that you prefer, such as a planter or a wooden box.

Step 6: Connect the Tubing

Connect the clear vinyl tubing to the fountain pump and place the other end into the base. The tubing should be submerged in water to allow the pump to circulate water up to the top of the sink. You can DIY a curtain of water over the side of the sink by adjusting the tubing’s position, or create a different effect by changing the height of the base.

Step 7: Turn the Fountain On

Fill the sink with water and turn on the pump. Adjust the flow rate of the pump and experiment with the fountain head to achieve the desired water flow and sound. You can also add some decorative items like waterproof LED lights to create an even more impressive fountain.

In conclusion, transforming a sink into a water fountain is a straightforward process that requires some basic DIY skills and a little creativity. By following the steps outlined in this article, you can create a beautiful, relaxing water feature that adds a therapeutic and aesthetic aspect to any space in your home or garden. Remember to always check the fountain and the pump’s motor regularly and clean the system to keep it running smoothly for a long time.

Also interesting:

• Why Do I Need A Mop Sink And Water Fountain In My Office?
• How Do You Place A Sink Or Water Fountain At A Low Height In The Vault Fallout 4?
• How Do I Build A Water Fountain?
• How To Make A Water Feature From An Old Sink?
• How To Do A Recycling Water Fountain Without Electricity?
• How Do I Put In A Filter For Elkay Water Fountain?
• How Do I Put In A Filter For A Water Fountain?
• How Often Should I Change The Filter In My Cats Water Fountain?
• How Often Do You Change The Filter In A Cat Water Fountain?
• How Often Do You Change Filters In The Catit Flower Water Fountain?

Last update 2023-12-04