How Do You Change Out A Bubler Cartridgre On A Refrigerated Water Fountain?

If you have a refrigerated water fountain at your home or workplace, it’s important to know how to change out the bubbler cartridge. Over time, minerals and other contaminants can build up in the cartridge, causing it to become clogged and reducing the flow of water. Fortunately, changing out the bubbler cartridge is a simple process that can be done with just a few basic tools and a little know-how.

To change out the bubbler cartridge on a refrigerated water fountain, follow these steps:

1. Shut off the water supply – Before you start working on the fountain, make sure to shut off the water supply to prevent any leaks or spills. Look for the shut-off valve near the fountain and turn it off completely.

2. Remove the bubbler cover – Locate the bubbler cover on the top of the fountain. In most cases, this will be a round metal cover that simply unscrews or pops off. Use a screwdriver or other tool if necessary to remove the cover.

3. Remove the old cartridge – Once the cover is off, you should be able to see the old cartridge inside the fountain. Carefully remove it by grasping it firmly and pulling it straight out. Be careful not to damage or bend any of the other components inside the fountain.

4. Clean the fountain – Before installing the new bubbler cartridge, take some time to clean out the inside of the fountain. Use a mild detergent and warm water to scrub down the surfaces and rinse thoroughly. This will help to remove any buildup and ensure that the new cartridge works properly.

5. Install the new cartridge – Insert the new bubbler cartridge into the opening in the fountain, making sure that it is lined up correctly and securely in place. You may need to twist or turn the cartridge slightly to get it to seat properly.

6. Reattach the cover – Once the new cartridge is installed, replace the bubbler cover and secure it in place. Use a screwdriver or other tool if necessary to tighten it up.

7. Turn on the water supply – Finally, turn the water supply back on and test the fountain to make sure that the new cartridge is working properly. If there are any leaks or other issues, turn off the water supply again and double-check your work.

Changing out the bubbler cartridge on a refrigerated water fountain is a quick and easy process that should only take a few minutes. By following these simple steps, you can ensure that your fountain remains clean and efficient, providing you and your family or colleagues with cool, fresh water whenever you need it. Whether you’re a novice or an experienced handyman, this is a job that anyone can do with ease.

In conclusion, maintaining a refrigerated water fountain is important for your health and safety. Changing out the bubbler cartridge might seem daunting at first, but with the instructions laid out in this article, you should be able to do it with ease. Keeping your water fountain clean and functioning properly will provide you with clean, fresh water for years to come.

Also interesting:

• Pedy Cat Water Fountain How Often Do You Need To Change Filter?
• How Do You Make A Water Fountain Out Of A Pot?
• How Often Do You Change Filters In The Catit Flower Water Fountain?
• How Often Do You Change The Filter In A Cat Water Fountain?
• How Do You Clean Out A Water Fountain?
• How Do You Clean Green Slime Out Of Small Yard Water Fountain?
• How Do You Build A Water Fountain Out Of Wine Bottles?
• How Often Do You Wash Out Your Catit Water Fountain?
• How Much Water Do You Drink Out Of Water Fountain?
• How Much Does A Refrigerated Drinking Water Fountain Cost?

Last update 2023-11-29