Adding a waterline to your water fountain is an essential component in maintaining the proper water levels of your fountain. Running out of water can cause damage to the pump and cause your fountain to stop working altogether. In this article, we will discuss the steps needed to add a waterline to your fountain in just a few easy steps.
Step 1: Determine the Type of Waterline You Need
There are two types of waterlines used for water fountains – flexible tubing or rigid PVC pipe. Flexible tubing is easier to work with and can be used for smaller fountains, whereas rigid PVC pipe is more durable and is recommended for larger fountains. It’s essential to choose the right kind of waterline that will work best for your fountain’s needs.
Step 2: Prepare Your Tools and Supplies
The tools you need to install a waterline include a hacksaw, PVC cutter, drill, and wrench. The supplies you need include PVC pipe, PVC cement, clamps, and a waterline kit. Make sure you have everything prepared before you start working.
Step 3: Find the Correct Water Line for Your Fountain
Locate the main water supply line for your fountain. This line is typically located near the pump and should be marked or labeled to make it easier to identify.
Step 4: Cut the Water Line to the Correct Length
Measure the distance between the water source and the fountain and then cut the water line to the correct length. You can use a hacksaw or a PVC cutter to make the cut.
Step 5: Attach the Water Line to the Main Supply Line
Attach one end of the water line to the main supply line using a clamp. Tighten the clamp securely, but don’t overtighten it.
Step 6: Run the Water Line to the Fountain
Drag the waterline to the fountain’s location and cut the end of the waterline so it’s flush with the fountain’s base.
Step 7: Attach the Water Line to the Fountain
Attach the other end of the water line to the fountain’s base using a clamp. Tighten the clamp securely, but don’t overtighten it.
Step 8: Pressurize the Water Lines
Once you have attached both ends of the waterline, you’ll need to pressurize the system. Do this by turning on the water supply and waiting until water comes out of the fountain. Monitor your fountain for any leaks or signs of damage.
Adding a waterline to your water fountain is a simple process that can be done in just a few steps. With the right tools and a little bit of time, you can ensure that your fountain is always running correctly, and you’ll have a continuous supply of water for your fountain. If you’re unsure of how to add a water line to your fountain, consult with a professional to help you through the process.
Table of Contents
Water Fall Fountain
Read More
Feline Water Fountain
Read More
Fairy Water Fountain
Read More
Also interesting:
- How To Replace A Waterline On A Oasis Water Fountain?
- How To Add A Drain Plug To Outdoor Water Fountain?
- How To Add Lighting To A Water Fountain After Installation?
- How To Add A Drain To Outdoor Water Fountain?
- How To Add Shooting Water Fountain To Pool?
- Adobe Photoshop Cc How To Add Water Feature To Scene?
- How To Add Fire To A Water Fountain?
- How To Add Water Feature To Pool?
- How To Add A Water Feature To An Existing Pool?
- How To Add A New Water Feature To Omnilogic?
Last update 2023-12-07