As an expert in water fountains, I understand how frustrating it can be when the plastic tubing on your small water fountain breaks. Fortunately, fixing it is not a complicated task and can be done with a few easy steps. In this article, I will share with you a detailed guide on how to fix plastic tubing on small water fountains.
First and foremost, you need to identify the location of the leak or damage on the plastic tubing. This will help you to determine the extent of the repair that needs to be done. Once you have identified the location, you can then proceed with the following steps:
Step 1: Turn off the water fountain
Before you start repairing the plastic tubing, ensure that you turn off the water fountain and unplug it from the power source. This will help to ensure that you don’t get electrocuted during the repair process.
Step 2: Remove the damaged tubing
Using a pair of scissors or a knife, carefully cut out the damaged section of the tubing. Ensure that you cut out a section that is slightly larger than the damaged area to ensure that you remove all the damaged parts. Be careful not to cut too much of the tubing as this may affect the functioning of the water fountain.
Step 3: Measure and cut the replacement tubing
Using a measuring tape, measure the length of the section of tubing that you removed. Cut a replacement tubing that is of the same length as the section that you removed. Ensure that the replacement tubing has the same diameter as the tubing you removed.
Step 4: Connect the replacement tubing
Using a connector, join the replacement tubing to the remaining part of the tubing. Ensure that you tighten the connector well to prevent any leaks. You can use pliers to tighten the connector further.
Step 5: Test the water fountain
Once you have connected the replacement tubing, turn on the water fountain and check for any leaks. If there are no leaks, then the repair is complete. If there are still leaks, then you may need to tighten the connectors further or redo the repair.
In conclusion, fixing plastic tubing on small water fountains is not a complicated process and can be done in a few easy steps. The key is to identify the location of the damage, remove the damaged section, measure and cut a replacement tubing, connect the replacement tubing and test the water fountain for any leaks. By following these steps, you can fix your small water fountain and continue to enjoy its beauty and functionality.
Table of Contents
- Show Me How To Replace Tubing And Pump For A Water Fountain?
- How To Fix A Small Water Fountain Pump?
- How To Fix Led Lights In Tortoise Water Fountain Small Indoor?
- How To Seal A Plastic Water Fountain?
- How To Fix Water Fountain Clear Silicone Fiberglass?
- What To Patch Plastic Water Fountain With?
- How To Fix My Fiberglass Water Fountain?
- How To Fix A Leaking Drinking Water Fountain?
- How To Turn Plastic Rock Water Fountain Into A Flower Planter?
- How To Make Indoor Water Fountain Using Plastic Container?
Last update 2023-12-03