Water fountains can add a stunning element to any garden, backyard, or home. If you are looking for a unique and affordable way to enhance the ambiance of your outdoor space, creating a DIY water fountain is a perfect solution. One such water fountain that you could make is the Tornaco water fountain. This fountain is easy to build, and it doesn’t require too many materials. In this article, we will discuss the steps you need to follow to make a Tornaco water fountain.
Table of Contents
Materials Required
The materials required to make this fountain are inexpensive, and most of them are readily available. The tools that you will need are:
- Large pottery planter
- Decorative rocks
- Solar fountain pump
- 1-inch diameter plastic tubing
- Silicone adhesive
- Small decorative items (optional)
Steps to follow
Step 1: Preparation
The first thing you need to do is to choose a sunny spot in your garden or backyard where you can place the fountain. Also, it’s important to make sure that the planter you choose is deep enough to hold water and the pump. Clean the pot and let it dry completely before moving to the next step.
Step 2: Create the tubing hole
Next, you need to drill a hole in the bottom of the planter, making sure it’s bigger than the diameter of the plastic tubing. The hole should be in the center of the planter’s bottom. Once you have drilled the hole, feed the tubing through it until it comes out from the top of the planter.
Step 3: Attach the pump
Attach the solar fountain pump to the end of the tubing that is inside the planter. Make sure the tubing is securely connected to the pump, so it doesn’t come loose. Before placing the pump in the planter, make sure to fill the planter with water to the point where the pump is completely submerged.
Step 4: Add Decorative rocks
After placing the pump in the water, add decorative rocks around the base of the tubing to help support it and to make the fountain look beautiful. Make sure the rocks don’t cover the solar panel of the pump, as it needs to be in clear sunlight to function correctly.
Step 5: Silicone adhesive
Apply silicone adhesive around the hole to seal it, making sure to let it dry for a few hours before turning on the pump.
Step 6: Final touches
Lastly, add small decorative items such as pebbles, seashells, or flowers to give your fountain a personal touch. You now have your Tornaco water fountain!
Benefits of a Tornaco Water Fountain
- Solar-powered: saves energy and reduces your electricity bill.
- No installation required and easy to maintain.
- It adds a stunning decorative element to your garden or backyard.
Making a Tornaco water fountain is an easy and affordable way to enhance the beauty of your outdoor living space. By following the above steps, you’ll be proud to say that you created this unique piece of art with your own hands. Not only is the Tornaco fountain easy to build, but it’s also easy to maintain, and it has environmental benefits. So, get ready to relax, watch the water dance, and let the peaceful sound take you away.
Also interesting:
- How To Make A Water Fountain Out Of A Planter?
- How To Make A Solar Water Feature?
- How To Make Make A Water Fountain At Home?
- How To Make A Sphere Water Fountain?
- How To Make Solar Water Fountain In Pot?
- How To Make A Planter Water Fountain?
- How To Make A Solar Water Fountain?
- How To Make Easy Water Fountain At Home?
- How To Make A Teapot Water Fountain?
- How To Make A Volute Water Feature?
Last update 2023-12-04