▷ How To Remove Motor In Petmate Water Fountain?

So you have a Petmate water fountain and you need to remove the motor for cleaning or replacement. It might seem like a daunting task, but with the right instructions, it can be a simple process. Follow these steps to safely and easily remove the motor from your Petmate water fountain.

Table of Contents

1 Tools you will need:
2 Step 1: Unplug and Disassemble the Fountain
3 Step 2: Disconnect the Motor
4 Step 3: Remove the Motor
5 Step 4: Clean the Motor
6 Step 5: Reassemble the Fountain
7 Related Products

Tools you will need:

Flathead screwdriver
Needlenose pliers
Small wire brush
Paper towels

Step 1: Unplug and Disassemble the Fountain

First, unplug the fountain from the power outlet. Then remove the top of the fountain and the pump cover. Depending on your Petmate water fountain’s model, you may need to remove other parts as well. Refer to your user manual for instructions.

Step 2: Disconnect the Motor

Using needlenose pliers, gently pull on the motor’s wiring to disconnect it from the pump. If the wiring is difficult to remove, use a flathead screwdriver to loosen it slightly. Be careful not to damage any of the wires.

Step 3: Remove the Motor

Once the wiring is disconnected, you should be able to remove the motor from the pump. If the motor is stuck, you can gently wiggle it back and forth until it comes free. Avoid using excessive force, as this can damage the motor or pump.

Step 4: Clean the Motor

Using a small wire brush and paper towels, clean the motor until it is free of any debris or gunk. Pay special attention to the motor’s impellers, as these can easily get clogged with pet hair or food particles.

Step 5: Reassemble the Fountain

Once the motor is clean, you can reassemble your Petmate water fountain according to the user manual’s instructions. Be sure to reconnect the motor’s wiring before turning the fountain back on.

Removing the motor from your Petmate water fountain is a simple process that should only take a few minutes. By following these steps, you can safely and easily remove the motor for cleaning or replacement. Remember to always refer to your user manual for specific instructions and safety precautions. With a little bit of maintenance, your Petmate water fountain will continue to provide fresh, clean water to your furry friends for years to come.