If you have a broken fiberglass water fountain bowl, there is no need to worry because it can be fixed. Fiberglass is a tough material, and with the right tools and techniques, you can repair it yourself. In this article, we will show you how to repair a broken fiberglass water fountain bowl step by step.
Before starting the repair process, you will need some materials and tools. Here’s a list of what you will need:
Materials:
– Fiberglass repair kit
– Resin
– Hardener
– Sandpaper
– Paintbrush
Tools:
– Rubber gloves
– Protective eyewear
– Respirator mask
– Wax paper
– Mixing cups
– Stir sticks
– Measuring cup
– Scissors
- Damp cloth
Now that you have all the necessary tools and materials let’s begin the repair process.
Step 1: Clean the Damaged Area
Firstly, you need to ensure that the damaged area is clean and dry. Use a damp cloth to remove any dust or debris around the affected area.
Step 2: Cut The Fiberglass Cloth
Cut a piece of the fiberglass cloth from the kit to the required size; it should be a bit larger than the damaged area.
Step 3: Mix Resin and Hardener
Mix the resin and hardener in the mixing cups following the instructions on the repair kit. Once done, apply it to the broken area on the water fountain bowl using a paintbrush.
Step 4: Apply Fiberglass Cloth
After applying the resin and hardener in the damaged area, lay the fiberglass cloth over the broken area. Push the cloth down with a stir stick over the broken area to ensure that it sticks properly.
Step 5: Apply The Second Coat of Resin
Once the fiberglass cloth is in place, you need to apply another coat of resin and hardener over it. This coat should be sufficient to cover the entire area of the cloth.
Step 6: Sand The Repaired Area
Once the resin and hardener have dried, use sandpaper to smoothen the surface of the repaired area. Begin with rough-grit sandpaper to level the surface, and then gradually work your way down to fine-grit sandpaper for a smooth finish.
Step 7: Paint The Surface
Once the surface is smooth, wipe it with a damp cloth to remove dust. After that, apply paint of the same color as the rest of the fountain bowl, and let it dry for a few hours.
In conclusion, it’s easy to repair a broken fiberglass water fountain bowl. By following the steps mentioned above, you can restore your broken fountain bowl to its original condition. It is vital to ensure that you use the right protective gear while carrying out the repair process. If you are unsure about completing the repair, seek professional help.
Table of Contents
Water Fountain Decor
Read More
Sink Water Fountain
Read More
Harmony Water Fountain
Read More
Also interesting:
- How To Repair My Water Fountain Base Broken Off?
- How To Repair A Broken Concrete Water Fountain?
- How To Repair A Water Fountain With Resin Cloth?
- How Can I Fix My Fiberglass Water Fountain The Bowl Is Crumbling?
- How To Fix Buddha Water Fountain Light Broken?
- How To Repair The Plaster On A Water Fountain?
- How To Repair Cracked Cement Water Fountain?
- How To Repair Chip In Water Fountain?
- How To Repair Cracks In Resin Outdoor Water Fountain?
- How To Repair Ceramic Water Fountain?
Last update 2023-12-04