If you have a hard water fountain, you may begin to notice that it begins to lose its shine and sparkle over time. Hard water deposits can build upon the surface, causing it to look dull and uninviting. The good news is that you don’t need to replace your fountain to restore its beauty. In this article, we’ll go over the steps to resurface your hard water fountain so that it looks as good as new.
Table of Contents
- 1 Materials Needed
- 2 Step-by-Step Instructions
- 3 Related Products
- Sanding block
- Steel wool
- Sanding paper (120 grit)
- Marble polishing powder
- Microfiber towel
- Soft-bristled brush
Step 1: Drain the Fountain
Before you start the resurfacing process, you’ll need to drain the water from your fountain. This will prevent any damage to the pump and electrical components. Once the water has been drained, unplug the fountain from its power source.
Step 2: Sand the Surface
Using a sanding block or steel wool, lightly sand the surface of the fountain. Be careful not to apply too much pressure, or you’ll risk scratching the surface. Use circular motions to remove any hard water deposits, until you have an even surface.
Step 3: Sand with Sandpaper
Using 120-grit sandpaper, sand the surface once again. This will further smoothen the surface, removing any surface stains or scratches, and giving it a new surface.
Step 4: Add the Polishing Powder
Take a microfiber towel, and sprinkle some marble polishing powder onto it. Work the powder into the surface of the fountain, using circular motions. Do this until you have covered the entire surface.
Step 5: Brush and Rinse with Water
Using a soft-bristled brush, scrub the surface of the fountain gently. Rinse the surface with water to remove any remaining polishing powder. Dry the surface with a microfiber towel until it is clean and shiny.
Step 6: Refill and Plug In
Once the surface of the fountain is dry, refill it with fresh water. Plug it back in, and turn it on to ensure that it works. You can now enjoy your beautifully resurfaced hard water fountain once again.
Resurfacing your hard water fountain is a task that can be accomplished easily and inexpensively. With a few simple tools and some elbow grease, you can restore the shine and beauty of your fountain. Follow the steps listed above, and you’ll have a beautifully resurfaced hard water fountain in no time. Enjoy the calming sound of moving water and the peace that comes with having such a wonderful addition to your garden or room.
- How To Clean Hard Water Stains From Ceramic Mini Water Fountain?
- How To Get Hard Water Stains Out Of A Water Fountain?
- How To Get Hard Water Stains Off Water Fountain?
- Fountain Hard Water Cleaner
- How To Remove Hard Water Stains From Water Fountain?
- Hard Water Cleaner For Fountain
- Fountain Hard Water Stain Cleaner
- Fountain Hard Water Cleaner Microbe Lift
- How Did They Disarm The Water Fountain Bomb In Die Hard With A Vegeance?
- How To Resurfacing A Water Fountain?
Last update 2023-12-04