If you’re a proud pet owner, then you know how important it is to keep your furry friends hydrated. The Pawslife Pet Water Fountain is a great solution for busy pet owners who want to make sure their pets always have access to fresh, clean water. However, with prolonged use, the pump of the fountain can become dirty, leading to clogging and decreased performance. In this article, we’ll show you how to clean the pump of the Pawslife Pet Water Fountain so that it continues to work optimally.
To clean the pump of the Pawslife Pet Water Fountain, follow these steps:
1. Turn off the power: Before you begin the cleaning process, make sure that the fountain is turned off and unplugged from the power source. This ensures that you avoid any electrical hazards during the process.
2. Remove the pump: The pump is located beneath the water fountain, and it can be easily removed by first taking off the fountain cover. Once you have access to the pump, unplug it from the water tube and remove it from the fountain.
3. Disassemble the pump: The pump has various components that need to be disassembled for proper cleaning. First, remove the impeller (the small propeller responsible for pumping the water). Then, take out the other parts of the pump such as the rotor, and the bushing.
4. Soak the parts in vinegar: Once the components of the pump are disassembled, soak them in a bowl of white vinegar for approximately 15-20 minutes. The vinegar helps to loosen any debris or buildup in the pump, making it easier to clean.
5. Clean the parts: Using an old toothbrush or a soft-bristled brush, gently clean the various parts of the pump that were soaked in vinegar. Ensure that you clean the impeller thoroughly as it tends to accumulate the most buildup.
6. Reassemble the pump: After all the parts have been cleaned, dry them with a clean towel or rag. Once they are dry, reassemble the pump in the reverse order of how they were disassembled. This means that you should start by putting the bushing back in place, followed by the rotor and finally the impeller.
7. Test the pump: Once everything is put back together, plug the pump back in and test it by turning on the fountain. Make sure that the water is flowing correctly and that there are no leaks.
By following these simple steps, you can ensure that your Pawslife Pet Water Fountain continues to provide fresh, clean water to your pets. It is recommended that you clean the pump every two weeks to keep it functioning optimally.
In conclusion, owning a Pawslife Pet Water Fountain is a great investment for pet owners who want to keep their pets hydrated. However, to ensure that the fountain continues to function optimally, regular cleaning is required. By following the steps outlined above, you can effectively clean the pump of the fountain and keep it in top condition for your pet’s enjoyment.
Table of Contents
- How To Clean A Pet Water Fountain Pump?
- How To Clean Pet Water Fountain Pump?
- How To Clean Cat Water Fountain Pump?
- Catit Water Fountain How To Clean Pump?
- How To Clean A Catit Water Fountain Pump?
- How To Clean Catit Water Fountain Pump?
- How To Clean A Water Fountain Pump?
- How To Clean A Cat Water Fountain Pump?
- How To Clean Pet Water Fountain?
- How To Clean A Pet Water Fountain?
Last update 2023-12-03